Skip to content
| Updated Daily Telegram WhatsApp
Home › RITES Mechanical Recruitment 2026: 27 AM Posts, Eligibility and Exam Guide

RITES Mechanical Recruitment 2026: 27 AM Posts, Eligibility and Exam Guide

27 RITES Mechanical Posts: Choose the Right Vacancy Before Applying

RITES invites applications for AM-Mechanical-I, II and III on a Contract Lumpsum basis, initially in Tamil Nadu. Mechanical diploma holders and degree holders have different experience requirements, while two categories additionally require UT or MPT certification.

Check Eligibility Exam and Syllabus Application Steps

RITES Mechanical Recruitment 2026: RITES Limited has advertised 27 vacancies under vacancy codes CL/09/26, CL/10/26 and CL/11/26. Online applications and fee payment are scheduled from 30 October to 20 November 2026. The written examination is scheduled for 29 November 2026.

Two decisions to make before paying: AM-Mechanical-II requires ASNT/ISNT Level-II in UT, while AM-Mechanical-III requires Level-II in MPT. Their written tests are scheduled at the same date and time in the evening shift. Do not assume you can attend both.

Recruitment Overview

OrganisationRITES Limited, Ministry of Railways
PostsAM-Mechanical-I, AM-Mechanical-II and AM-Mechanical-III
Total vacancies27
Employment typeContract Lumpsum basis
Initial postingTamil Nadu; subsequent posting anywhere in India may be required
Application deadline20 November 2026; no closing time specified in the supplied advertisement
Eligibility cutoff20 November 2026 for age, experience and other eligibility conditions
Maximum age40 years before applicable relaxation
SelectionWritten test and interview, with document verification and medical fitness requirements
Monthly remuneration statedBasic ₹24,258; approximate gross ₹38,085

Source: RITES advertisement for vacancy codes CL/09/26 to CL/11/26. Locate the matching notice and any amendments through the official RITES website → Careers.

Vacancy Distribution

Post / VC codeUREWSOBC-NCLSCSTTotal
AM-Mechanical-I
CL/09/26
8131114
AM-Mechanical-II
CL/10/26
6121010
AM-Mechanical-III
CL/11/26
300003
Total17252127

Two PwBD-C category reservations are horizontal: one each in CL/09/26 and CL/10/26. They are included within the 27 vacancies, not additional posts. The advertisement identifies locomotor disability classifications OA and OL, subject to its functional and physical requirements.

Important Dates and Exam Shifts

EventDate / shift
Online application and payment begin30 October 2026
Application and payment deadline20 November 2026
CL/09/26 written test29 November 2026 — Morning shift
CL/10/26 and CL/11/26 written tests29 November 2026 — Evening shift, same date and time
InterviewDetails to be communicated later

Exact reporting times and venue details will be communicated separately. Keep checking the official Careers section and your registered email.

Educational Qualification and Experience

PostMinimum qualificationAdditional certification
AM-Mechanical-IFull-time Diploma / BTech in MechanicalNo UT/MPT Level-II certificate specified as a minimum condition for this category
AM-Mechanical-IIFull-time Diploma / BTech in MechanicalASNT / ISNT Level-II in UT
AM-Mechanical-IIIFull-time Diploma / BTech in MechanicalASNT / ISNT Level-II in MPT

Experience requirement for all three categories:

  • Diploma holders: Minimum eight years of post-qualification experience.
  • Degree holders: Minimum two years of post-qualification experience.
  • The experience must be in QA/QC/testing, destructive or non-destructive, preferably in steel plants and rolling, forging or casting industries.

The word “preferably” relates to the listed industries; it does not remove the mandatory QA/QC/testing experience requirement.

Minimum Marks

  • UR/EWS and candidates competing against unreserved posts: First-class qualification / minimum 60% marks as specified in the advertisement.
  • Eligible reserved-category candidates competing against reserved posts: At least 50% in the minimum qualification.

A reserved-category certificate does not automatically provide the reduced marks requirement when applying against an unreserved post. CL/11/26 has only UR vacancies.

The qualification must be from the recognised institution/university route described in the notice. Recognised Sections A and B examinations of the Institution of Engineers (India), treated as degree-equivalent under the stated conditions, are also accepted.

Where marks are expressed as CGPA/DGPA, obtain the institution’s conversion formula. If no formula exists, the advertisement requires an authorised institutional undertaking before applying its stated 6/10-to-60% treatment. Do not invent your own conversion.

Which Experience Does Not Count?

The notice excludes training other than on-the-job training, internship, teaching, academic, fellowship and PhD research experience. Experience must also meet the post-qualification and relevant-work conditions.

Illustrative eligibility check: A Mechanical diploma holder with six years of qualifying QA/QC experience does not meet the eight-year diploma requirement. A qualifying degree holder with two years may meet the experience threshold, but must separately satisfy marks, age and the UT/MPT certificate requirement for the chosen post.

For candidates who completed a degree after a diploma, do not automatically combine all pre-degree experience to claim eligibility through the degree route. Map qualification dates and experience carefully and seek clarification where necessary.

Age Limit and Relaxation

The maximum age is 40 years as on 20 November 2026.

  • SC/ST: five years’ relaxation where applicable under the reservation conditions.
  • OBC-NCL: three years’ relaxation where applicable.
  • PwBD: ten years, with applicable additional SC/ST/OBC-NCL relaxation, subject to the post being identified as suitable.

PwBD age relaxation may apply even where a vacancy is not specifically reserved, provided the post is identified as suitable. Benchmark-disability benefits require the relevant disability of at least 40%, as stated in the notice. Other concessions are governed by the advertisement and applicable government orders.

Pay, Posting and Contract Conditions

Monthly basic pay₹24,258
Approximate monthly gross pay₹38,085
Initial contractOne year
ExtensionUntil assignment completion, subject to mutual consent and satisfactory performance
PostingInitially Tamil Nadu; anywhere in India according to company requirements

Gross pay is not take-home pay. The notice states that basic remuneration will be revised according to Central Government minimum-wage rates notified from time to time.

Offers depend on project/company requirements and deployment criteria. Empanelment does not guarantee a job offer. The advertisement also includes termination provisions for unsatisfactory performance, misconduct and discontinuation of services by the client.

Application Fee and Conditional Refund

Category in fee tableFee
General / OBC₹600 plus applicable taxes
EWS / SC / ST / PwD₹300 plus applicable taxes
Read the fee notes as well: For posts not reserved for SC/ST/PwD, candidates from those categories must pay the full fee at the application stage under the advertisement’s additional condition. Check the selected vacancy and portal calculation before payment.

SC/ST/PwD candidates may receive a refund after participating in the applicable written examination/interview and verification of their category certificate. GST/bank charges are deducted, and the refund goes to the original payment source. Upload the category certificate at the payment stage as instructed.

The notice does not extend this refund provision to EWS candidates. This recruitment should not be described as “free application” for SC/ST/PwD applicants.

Written Exam Pattern and Selection Weightage

Questions125 objective questions
Marks125; one mark per question
Duration2.5 hours / 150 minutes
Negative markingNone
PwBD compensatory time50 minutes, as specified in the advertisement
Interview shortlist ratio1:6 to vacancies
Final weightageWritten test 60%; interview 40%

The interview component comprises technical/professional proficiency of 30 and personality, communication and competency of 10 in the overall weightage framework.

Minimum Qualifying Marks

StageUR/EWSSC/ST/OBC-NCL/PwBD against reserved posts
Written test50%45%
Interview60%50%

These are qualifying thresholds, not guaranteed selection cutoffs. The notice specifies no separate minimum qualifying marks in the aggregate. Candidates may interview in Hindi or English. Appointment also depends on eligibility verification and medical fitness.

Official Written-Test Syllabus

SectionApproximate questionsTopics
Quantitative Aptitude35Number system, arithmetic, algebra, geometry, series, trigonometry, quadratic equations, mensuration, averages, profit/loss, ratio, work/time, speed/distance, probability, interest, permutations and combinations
Data Interpretation35Tables, charts, graphs, series and data analysis
Logical Reasoning35Puzzles, seating arrangements, inequalities, Venn diagrams, blood relations, directions, ordering/ranking, verbal reasoning, spatial ability and patterns
Basic Awareness / General Knowledge20Current affairs, national/international events, sports, awards, history, geography, polity, economy, culture and general science
Preparation priority: The published written syllabus does not list a Mechanical technical section. Prepare the four listed areas for the written test, while revising your technical experience for the interview. The section-wise question counts are approximate.

A Practical Three-Week Preparation Plan

Editorial guidance, not an official timetable:

  • Week 1: Take a diagnostic test. Revise arithmetic fundamentals, basic reasoning and table/chart calculations. Begin a short daily GK revision session.
  • Week 2: Practise timed DI sets and reasoning puzzles. Revisit topics where errors arise from calculation, comprehension or poor time allocation.
  • Week 3: Attempt full 125-question, 150-minute practice papers. Review every incorrect and skipped question before taking another mock.

Because there is no negative marking, plan time to return to unanswered questions after securing easier marks. Follow the actual examination instructions. Use our mock-test analysis guide to record recurring mistakes.

Technical Interview Preparation

Prepare examples from your actual QA/QC/testing work: the inspection requirement, procedure followed, equipment used, acceptance criteria, reporting and handling of non-conformities. For UT/MPT roles, revise the method associated with your certificate and be ready to explain work you personally performed. These are preparation suggestions, not a separate published interview syllabus.

Written-Test Centres

The tentative cities are Chennai, Bangalore, Thiruvananthapuram and Secunderabad. Applicants must provide two centre preferences. RITES may allot a different centre, and centre availability depends on candidate numbers and its discretion.

No fares, TA or DA are payable under the advertisement. Confirm the allotted venue before making travel arrangements.

How to Apply Online

  1. Visit the official RITES website and open Careers.
  2. Locate the recruitment for CL/09/26, CL/10/26 and CL/11/26. Read the advertisement and any corrigendum.
  3. Select the correct vacancy after checking experience, certification, category and exam-shift conflict.
  4. Complete the online registration/application. Save the generated registration number.
  5. Enter your identity-proof details accurately and retain that same original ID for later verification.
  6. Complete the “Fill/Modify Application Form” details and upload the supporting documents under “Upload Document”.
  7. Pay through the prescribed “Make Payment” section. Verify successful payment and download the invoice.
  8. Download the final application, print and sign it, and retain it for the selection process.

No postal submission: Do not send application hard copies to the office by post/courier. The advertisement allows only one application per vacancy; separate applications for other vacancies are permitted, but the CL/10/26 and CL/11/26 exam clash remains.

Once submitted, an application cannot be altered. Review all entries before final submission. A payment debit without a successfully completed application should not be assumed sufficient.

Documents to Upload

  • High School certificate for date of birth.
  • Academic and professional certificates with all semester/year marksheets, as applicable.
  • Institution-issued percentage-conversion document, where required.
  • Applicable EWS/SC/ST/OBC-NCL/PwBD certificate.
  • Identity and address proof.
  • PAN card.
  • Evidence of every claimed experience period, arranged chronologically in a single PDF as instructed.
  • ASNT/ISNT Level-II UT or MPT certificate for the applicable role.
  • Other documents supporting your application claims.

Follow the application portal’s actual file-format and size instructions; the supplied notice does not provide a universal upload-size limit.

Experience Proof: An Offer Letter Alone Is Not Enough

The general instructions explicitly say that an offer letter is not accepted by itself as experience proof. Support the actual period worked with joining/relieving orders or experience certificates and relevant continuity evidence.

For current employment, the notice refers to an experience certificate/joining letter with recent salary slips, or Form 16 and other documents clearly establishing continuity. Match your claimed dates and duties to these records.

Use our experience-certificate and calculation guide to organise the evidence.

Category Certificates

  • OBC-NCL: Certificate must not be older than one year on 20 November 2026, with the required NCL conditions. Annexure III declaration is required during document verification.
  • EWS: Income and Asset Certificate in the Government of India format, valid for FY 2026–27 and meeting the crucial-date condition.
  • Additional opportunity: The notice allows submission of valid OBC-NCL/EWS certificates at joining, but the certificate must establish eligibility as on the crucial date. This does not waive the cutoff-date requirement.

If the reserved-category claim is not established, consideration under UR is conditional on meeting all UR eligibility requirements.

Annexure A and Document Verification

Bring two completed copies of Annexure A when called for document verification/selection, along with the required records. Complete the candidate section, mark submitted documents accurately and leave the official verification section blank.

  • Carry originals and one self-attested photocopy set as directed.
  • Keep educational and experience records in chronological order.
  • Keep the signed application showing your registration number.
  • Carry applicable category/disability certificates and identity documents.
  • Government/PSU employees should arrange the applicable NOC and relieving requirements.
  • Annexure A lists two recent colour photographs, while the earlier checklist mentions one; carrying two covers both stated quantities.

Helpdesk and Application Problems

Recruitment queries: cont.rectt@rites.com. Include the VC number, registration/roll number, full name in block letters and the email address used in your application.

Payment helpdesk: 011-33557000, extension 13221; pg.service@hdfc.bank.in.

If the payment invoice cannot be downloaded, the notice directs candidates to contact cont.rectt@rites.com immediately with registration details.

Suggested Query Email

Subject: CL/[code]/26 — [Registration Number] — [Brief Issue]

Dear Sir/Madam,
I request clarification regarding [state the precise issue].

VC number: [code]
Registration/roll number: [number]
Full name: [NAME IN BLOCK LETTERS]
Registered email: [email]

[Briefly describe the issue and relevant transaction/document details, without sharing passwords or OTPs.]

Kindly advise the required action.
Regards,
[Name]

Frequently Asked Questions

How many vacancies are advertised?

There are 27: 14 for AM-Mechanical-I, 10 for AM-Mechanical-II and three for AM-Mechanical-III.

Can diploma holders apply with two years’ experience?

No. The diploma route requires eight years of qualifying post-qualification experience. The two-year requirement applies to the qualifying degree route.

Can I attend both the UT and MPT post examinations?

The advertisement schedules CL/10/26 and CL/11/26 at the same date and time. Do not plan on attending both.

Is there negative marking?

No. The written test has 125 one-mark questions over 150 minutes, with no deduction for incorrect answers.

Is the written test based on Mechanical Engineering?

The published syllabus lists Quantitative Aptitude, Data Interpretation, Logical Reasoning and Basic Awareness/GK. It does not specify a Mechanical technical section.

Is ₹38,085 the take-home salary?

No. It is the approximate monthly gross amount stated in the notice. Basic pay is ₹24,258; take-home pay can differ.

Are these permanent jobs?

No. The appointment is initially for one year on contract, with extension subject to the stated conditions and assignment requirements.

Do I need to post the application?

No. Apply online and retain the signed printout and supporting records for the selection process.

Official Resources

Related Guides

Related recruitment notices have separate deadlines and conditions; check their current status before applying.

Which requirement needs clarification? Ask about the diploma/degree experience route, UT/MPT certification or document preparation in the comments. Do not share application numbers, identity documents, passwords or OTPs.
Follow our WhatsApp channel or Telegram channel for recruitment updates.

Editorial note: Prepared from the supplied RITES advertisement for CL/09/26–CL/11/26. Preparation plans and practical examples are editorial guidance. The official advertisement, corrigenda, portal instructions and individual call letters govern recruitment.

आपका सवाल, अगली बेहतर Guide

कहाँ अटक रहे हैं? इस post से जुड़ा अपना सवाल बताएँ।

Eligibility, application, documents या तैयारी—क्या समझने में मदद चाहिए? नीचे लिखें। Mobile number, Aadhaar, password या OTP न लिखें। Comments समीक्षा के बाद दिखाई देंगे।

Comments

Share This Post

Don't Miss Visual Updates!

Follow us on Instagram for daily reels & carousels

@sarkarinokrii.official
SN

Sarkari Nokrii Team

Verified govt-job updates daily. Sources: official .gov.in / .nic.in portals only.

Join Sarkari Nokrii Community

1 Lakh+ candidates trust Sarkari Nokrii for daily Govt Job updates

SHARE
✓ Link copied!